- ページ 10

スイッチ Siemens Sitrans WM100のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens Sitrans WM100 22 ページ。 Motion sensing switch
Siemens Sitrans WM100 にも： 取扱説明書 (16 ページ)

ページを印刷する
Siemens Sitrans WM100 取扱説明書
Connecting
5.1 WM100 Circuit Card
WM100 Connection
Note
1. Dry contacts shown in de-energized (alarm or shelf) state.
2. WM100 is manufactured for either 115 or 230 V AC operation. Check WM100 nameplate
for applicable voltage. Correct voltage must be supplied. Voltages lower than specified
will result in an inoperative condition. Voltages higher than specified will severely damage
unit.
3. For 5 second time delay and minimum 12 ppm range, connect jumper across terminals 7
and 8. Without a jumper, the default is 10 second time delay and minimum 6 ppm range.
10
Operating Instructions, 07/2017, A5E45103494-AA
SITRANS WM100