Cisco Unified IP Phone Expansion Module 7915 Manual - Página 11
Navegue en línea o descargue pdf Manual para Teléfono IP Cisco Unified IP Phone Expansion Module 7915. Cisco Unified IP Phone Expansion Module 7915 27 páginas. Unified ip phone and expansion module for unified communications manager express 4.3 and later versions
También para Cisco Unified IP Phone Expansion Module 7915: Referencia rápida (2 páginas)
Imprimir página
Insert the hooks into the slots and then rotate the top
Step 3
of the Cisco Unified IP Phone Expansion Module 7915
into the support bar so that it rests flush with the bar.
Tighten the thumbscrew on the back of the
Step 4
Cisco Unified IP Phone Expansion Module 7915.
Note
Connect the Interface Cable
Refer to Figure 5 which depicts the "in" and "out" icons on the
AUX jacks, and to and the steps that follow.
Figure 5
"In" and "Out" Icons on the AUX Jacks
In icon
Plug one end of the interface cable into the jack labeled
Step 1
AUX on the Cisco Unified IP Phone.
Plug the other end of the interface cable into the AUX
Step 2
jack with the "in" icon underneath on the
Cisco Unified IP Phone Expansion Module 7915.
Note
If you are installing two Expansion Modules,
repeat Steps 2, 3, and 4 for the second
Expansion Module.
Out icon
If you are installing a second Cisco Unified
IP Phone Expansion Module 7915, continue
with Steps 3 and 4. Otherwise go to the
"Connect the Power Supply Unit" section on
page 12.
11