Cisco 10000 Series Manual de instalación
Navegue en línea o descargue pdf Manual de instalación para Enrutador de red Cisco 10000 Series. Cisco 10000 Series 14 páginas. Cisco systems router installation guide
También para Cisco 10000 Series: Boletín de productos (12 páginas)
Imprimir página
Upgrading to Cisco IOS Release 12.2(28)SB on a
Cisco 10000 Series Router
This document describes how to upgrade a Cisco 10000 series router to Cisco IOS Release 12.2(28)SB
on an ESR-PRE2 processor. Four different procedures are available; the choice of which to use depends
on the specific system configuration you start from.
Upgrading a system that currently uses an ESR-PRE1 requires a hardware upgrade to an ESR-PRE2. For
hardware installation instructions, see the
at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/hdwr/3971pr.htm
Technical Support
The Cisco Technical Support Website provides online documents and tools for troubleshooting and
resolving technical issues with Cisco products and technologies. Support is available 24 hours a day,
365 days a year, at this URL:
http://www.cisco.com/techsupport
This web page has a link for email or phone technical support.
All the procedures in this document are service-affecting. These procedures can require a hardware
Note
replacement, forced switchover of the active PRE, or software reload. At some point during each
process, the router will not be available for user traffic.
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco 10000 Router Performance Routing Engine Installation