Cisco 10000 Series Panduan Instalasi

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Router Jaringan Cisco 10000 Series. Cisco 10000 Series 14 halaman. Cisco systems router installation guide
Juga untuk Cisco 10000 Series: Buletin Produk (12 halaman)

Halaman Cetak

Upgrading to Cisco IOS Release 12.2(28)SB on a

Cisco 10000 Series Router

This document describes how to upgrade a Cisco 10000 series router to Cisco IOS Release 12.2(28)SB

on an ESR-PRE2 processor. Four different procedures are available; the choice of which to use depends

on the specific system configuration you start from.

Upgrading a system that currently uses an ESR-PRE1 requires a hardware upgrade to an ESR-PRE2. For

hardware installation instructions, see the

at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/hdwr/3971pr.htm

Technical Support

The Cisco Technical Support Website provides online documents and tools for troubleshooting and

resolving technical issues with Cisco products and technologies. Support is available 24 hours a day,

365 days a year, at this URL:

http://www.cisco.com/techsupport

This web page has a link for email or phone technical support.

All the procedures in this document are service-affecting. These procedures can require a hardware

Note

replacement, forced switchover of the active PRE, or software reload. At some point during each

process, the router will not be available for user traffic.

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco 10000 Router Performance Routing Engine Installation