Cisco 10000 Series 설치 매뉴얼

{카테고리_이름} Cisco 10000 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 10000 Series 14 페이지. Cisco systems router installation guide
Cisco 10000 Series에 대해서도 마찬가지입니다: 제품 게시판 (12 페이지)

페이지 인쇄

Upgrading to Cisco IOS Release 12.2(28)SB on a

Cisco 10000 Series Router

This document describes how to upgrade a Cisco 10000 series router to Cisco IOS Release 12.2(28)SB

on an ESR-PRE2 processor. Four different procedures are available; the choice of which to use depends

on the specific system configuration you start from.

Upgrading a system that currently uses an ESR-PRE1 requires a hardware upgrade to an ESR-PRE2. For

hardware installation instructions, see the

at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/hdwr/3971pr.htm

Technical Support

The Cisco Technical Support Website provides online documents and tools for troubleshooting and

resolving technical issues with Cisco products and technologies. Support is available 24 hours a day,

365 days a year, at this URL:

http://www.cisco.com/techsupport

This web page has a link for email or phone technical support.

All the procedures in this document are service-affecting. These procedures can require a hardware

Note

replacement, forced switchover of the active PRE, or software reload. At some point during each

process, the router will not be available for user traffic.

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco 10000 Router Performance Routing Engine Installation