Cisco NCS 4016 Desembalaje e instalación - Página 4
Navegue en línea o descargue pdf Desembalaje e instalación para Enrutador de red Cisco NCS 4016. Cisco NCS 4016 8 páginas. Network convergence system
También para Cisco NCS 4016: Manual (24 páginas), Manual de desembalaje, traslado y sujeción (40 páginas), Instalación de (31 páginas)
Imprimir página
Removing the Chassis from the Pallet
Step 4
Remove the accessories, corrugated accessory tray and the top foam cap.
Step 5
Leave the chassis on the pallet until you are ready to move and install the chassis in a rack.
Be sure to save the packaging in case you need to return any of the components.
Tip
What to do next
What to Do Next
After performing this task, go to the
Removing the Chassis from the Pallet
This procedure describes how to remove the support brackets that secure the chassis to the pallet.
Figure 3: Hardware Locations for Support Brackets
1
Required Tools and Equipment
• Number 1 and number 2 Phillips screwdrivers
• 3/8-in. socket wrench or 3/8-in. drive ratchet wrench
Steps
To remove the chassis from the pallet and then transfer the chassis to a moving device, follow these steps:
Unpacking the Chassis
4
28 M4 screws (14 on each side)
Removing the Chassis from the Pallet, on page
2
8 bolts with washers (4 on each side)
Unpacking the Chassis
4.