Cisco NCS 4016 Paketten Çıkarma ve Kurulum - Sayfa 4
Ağ Yönlendiricisi Cisco NCS 4016 için çevrimiçi göz atın veya pdf Paketten Çıkarma ve Kurulum indirin. Cisco NCS 4016 8 sayfaları. Network convergence system
Ayrıca Cisco NCS 4016 için: Manuel (24 sayfalar), Ambalajdan Çıkarma, Taşıma ve Emniyete Alma Kılavuzu (40 sayfalar), Yükleme (31 sayfalar)
Sayfayı Yazdır
Removing the Chassis from the Pallet
Step 4
Remove the accessories, corrugated accessory tray and the top foam cap.
Step 5
Leave the chassis on the pallet until you are ready to move and install the chassis in a rack.
Be sure to save the packaging in case you need to return any of the components.
Tip
What to do next
What to Do Next
After performing this task, go to the
Removing the Chassis from the Pallet
This procedure describes how to remove the support brackets that secure the chassis to the pallet.
Figure 3: Hardware Locations for Support Brackets
1
Required Tools and Equipment
• Number 1 and number 2 Phillips screwdrivers
• 3/8-in. socket wrench or 3/8-in. drive ratchet wrench
Steps
To remove the chassis from the pallet and then transfer the chassis to a moving device, follow these steps:
Unpacking the Chassis
4
28 M4 screws (14 on each side)
Removing the Chassis from the Pallet, on page
2
8 bolts with washers (4 on each side)
Unpacking the Chassis
4.