Cisco NCS 4016 Uitpakken en installeren - Pagina 4

Blader online of download pdf Uitpakken en installeren voor {categorie_naam} Cisco NCS 4016. Cisco NCS 4016 8 pagina's. Network convergence system
Ook voor Cisco NCS 4016: Handmatig (24 pagina's), Handleiding uitpakken, verplaatsen en vastzetten (40 pagina's), Installing (31 pagina's)

Pagina afdrukken

Removing the Chassis from the Pallet

Step 4

Remove the accessories, corrugated accessory tray and the top foam cap.

Step 5

Leave the chassis on the pallet until you are ready to move and install the chassis in a rack.

Be sure to save the packaging in case you need to return any of the components.

Tip

What to do next

What to Do Next

After performing this task, go to the

Removing the Chassis from the Pallet

This procedure describes how to remove the support brackets that secure the chassis to the pallet.

Figure 3: Hardware Locations for Support Brackets

Required Tools and Equipment

• Number 1 and number 2 Phillips screwdrivers

• 3/8-in. socket wrench or 3/8-in. drive ratchet wrench

Steps

To remove the chassis from the pallet and then transfer the chassis to a moving device, follow these steps:

Unpacking the Chassis

28 M4 screws (14 on each side)

Removing the Chassis from the Pallet, on page

8 bolts with washers (4 on each side)

Unpacking the Chassis