Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Nota de instalación - Página 2

Navegue en línea o descargue pdf Nota de instalación para Hardware de red Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 18 páginas. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
También para Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Nota de instalación (14 páginas), Manual de soluciones (17 páginas), Nota de instalación (46 páginas), Libro Blanco (19 páginas), Descripción (1 páginas), Boletín de productos (6 páginas), Aviso (4 páginas), Ficha de datos (9 páginas), Ficha de datos (18 páginas), Libro Blanco (18 páginas), Manual de configuración (8 páginas), Nota de instalación (28 páginas), Manual de solución de problemas (11 páginas), Manual del usuario (17 páginas), Nota de instalación (24 páginas), Manual (19 páginas), Nota de instalación (36 páginas)

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Nota de instalación
Contents
The DRAM DIMMs on the Supervisor Engine 1A with an MSFC (WS-X6K-SUP1A-MSFC) are located
Note
beneath the MSFC. The MSFC is not field replaceable. Re-installing the MSFC could damage your
supervisor engine. To upgrade the DRAM, you must also upgrade the MSFC to an MSFC2. Both
upgrades are available in the MEM-S1-128MB-UPG= upgrade kit.
For information on removing the MSFC, refer to the Catalyst 6500 Series Multilayer Switch Feature
Card 2 Installation Note at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_10605.htm
Contents
This publication consists of these sections:

Memory Recommendations and Requirements

See
Table 1
Catalyst Software
Release
6.x
Catalyst 6500 Series Supervisor Engine 1A DRAM Upgrade Installation Note
2
Table 1
for memory recommendations and requirements.
Memory Recommendations and Requirements
Memory
With Catalyst software releases 6.x, your Supervisor Engine 1A configuration
is fully supported with 64-MB DRAM.
Recommendation/
Requirement
78-14357-02