ACU-RITE SENC 150 Manual de referencia - Página 15
Navegue en línea o descargue pdf Manual de referencia para Media Converter ACU-RITE SENC 150. ACU-RITE SENC 150 20 páginas. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
También para ACU-RITE SENC 150: Manual de instalación (8 páginas), Manual de instalación (4 páginas), Manual de instalación (6 páginas), Manual de instrucciones (12 páginas)
Imprimir páginaSENC 150
Leveling screws
Adjust the leveling set screws as follows:
Insert, but do not tighten 8-32 (M4) reading head screws
as shown on the right side.
Place a 0.025 mm - 0.075 mm (0.001"- 0.003") shim between
the leveling set screws and mounting surface.
Adjust each set screw until a slight drag is felt on the shim.
Remove the shim before tighten the reading head screws.
Mounting the reading head
M3 x 12 mm SHSS
M4 x 25 mm SHCS low head
(8-32 x 5/8" SHCS low head)
(8-32 x 3/4" SHCS low head)
Mounting the reading head with hex nut
M4 hex nut
Do not tighten prior to adjusting leveling set screws.
Evenly tighten the 8-32 (M4) reading head mounting screws.
Removing the alignment brackets
Slide brackets away from reading head and cable.
Slide the brackets away from the reading head.
Remove the alignment brackets and save for future use.
7 Mounting the reading head
M4 x 25 mm SHCS low head
(8-32 x 5/8" SHCS low head)
(8-32 x 3/4" SHCS low head)
15