ACU-RITE SENC 150 Manuale di riferimento - Pagina 15

Sfoglia online o scarica il pdf Manuale di riferimento per Convertitore multimediale ACU-RITE SENC 150. ACU-RITE SENC 150 20. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Anche per ACU-RITE SENC 150: Manuale di installazione (8 pagine), Manuale di installazione (4 pagine), Manuale di installazione (6 pagine), Manuale di istruzioni (12 pagine)

SENC 150

Leveling screws

Adjust the leveling set screws as follows:

 Insert, but do not tighten 8-32 (M4) reading head screws

as shown on the right side.

 Place a 0.025 mm - 0.075 mm (0.001"- 0.003") shim between

the leveling set screws and mounting surface.

 Adjust each set screw until a slight drag is felt on the shim.

 Remove the shim before tighten the reading head screws.

Mounting the reading head

M3 x 12 mm SHSS

M4 x 25 mm SHCS low head

(8-32 x 5/8" SHCS low head)

(8-32 x 3/4" SHCS low head)

Mounting the reading head with hex nut

M4 hex nut

Do not tighten prior to adjusting leveling set screws.

Evenly tighten the 8-32 (M4) reading head mounting screws.



Removing the alignment brackets

Slide brackets away from reading head and cable.

 Slide the brackets away from the reading head.

 Remove the alignment brackets and save for future use.

7 Mounting the reading head

M4 x 25 mm SHCS low head

(8-32 x 5/8" SHCS low head)

(8-32 x 3/4" SHCS low head)