Cisco UCS B200 M3 Manual de instalación - Página 17

Navegue en línea o descargue pdf Manual de instalación para Hardware de red Cisco UCS B200 M3. Cisco UCS B200 M3 34 páginas. Blade server
También para Cisco UCS B200 M3: Nota de instalación y mantenimiento (36 páginas), Nota de instalación y mantenimiento (37 páginas), Manual (8 páginas), Manual de actualización (21 páginas), Nota de instalación y mantenimiento (28 páginas)

c) Lift the tool and CPU straight up.

Figure 12: Proper Alignment of CPU Pick and Place Tool (for Intel Xeon E5-2600 Series Processors)

Alignment mark on the button/handle of the pick and

place tool

Installing a New CPU and Heat Sink

Before installing a new CPU in a server, verify the following:

• The CPU is supported for that given server model. This may be verified via the server's Technical Specifications ordering guides

or by the relevant release of the Cisco UCS Capability Catalog.

• A BIOS update is available and installed that supports the CPU and the given server configuration.

• If the server will be managed by Cisco UCS Manager, the service profile for this server in Cisco UCS Manager will recognize

and allow the new CPU.

The Pick-and-Place tools used in this procedure are required to prevent damage to the contact pins between

Caution

the motherboard and the CPU. Do not attempt this procedure without the required tools, which are included

with each CPU option kit. If you do not have the tool, you can order a spare: Cisco PID UCS-CPU-EP-PNP=

for 10-, 8-, 6-, 4-, or 2-core CPUs (green); UCS-CPU-EP2-PNP= for v2 12-core CPUs (purple).

Alignment mark on the socket