Epson 2400 - Perfection Photo - Dpi x Manual Start Here - Página 6

Smart Panel

To select the Color Restoration setting, open Smart Panel and select

Reprint Photo. You see the screen below.

Click the Color Restoration icon.

EPSON Scan

Color restoration is available in Home and Professional modes.

To select Color Restoration,

start EPSON Scan.

You see a screen

similar to this.

Click the Preview button at the bottom of the screen.

Select the Color Restoration checkbox. (If you're using Professional

Mode, you may need to scroll to the bottom of the screen.)

Scanning Film

The scanner cover has a built-in film transparancy unit. To scan film or negative

strips, slides, or transparencies, you need to remove the document mat from the

scanner cover and insert the film in a holder.

Follow these steps to scan 35 mm film or slides:

Make sure the cable for the transparency unit is connected to the scanner

(see section 3). If you need to connect the cable, first disconnect the

scanner from the electrical outlet. After you have connected the cable,

plug the scanner back into the outlet.

Open the scanner cover. Pull the handle for the document mat up slightly

until the handle is free of the cover, then pull the document mat forward

and out.

Locate the film holder that came with your scanner. Slide a strip of 35 mm

film into the film strip holder, with the film's shiny side side facing down.

Select Color

Restoration

Click Color

Restoration

Click here to

scan and print

continue