Cisco UCS B200 M4 Nota de instalación y mantenimiento - Página 19
Navegue en línea o descargue pdf Nota de instalación y mantenimiento para Servidor Cisco UCS B200 M4. Cisco UCS B200 M4 46 páginas. For e5-2600 v4 series cpus
También para Cisco UCS B200 M4: Nota de instalación y mantenimiento (30 páginas), Manual de actualización (9 páginas), Manual de mantenimiento (24 páginas)
Imprimir página
Servicing a Blade Server
This chapter contains the following sections:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Drive Replacement
The modular storage system has two front-accessible drive bays that support hot-swappable, 2.5 inch drives.
If you purchased the UCS B200 M4 blade server without the modular storage system configured as a part of
the system, a pair of blanking panels may be in place. These panels should be removed before installing hard
drives, but should remain in place to ensure proper cooling and ventilation if the drive bays are unused.
You can remove and install hard drives without removing the blade server from the chassis.
The drives supported in this blade server come with the drive sled attached. Spare drive sleds are not available.
A list of currently supported drives is in the specification sheets at this
products/servers-unified-computing/ucs-b-series-blade-servers/datasheet-listing.html
Drive Replacement, page 11
Removing a Blade Server Cover, page 13
Air Baffles, page 14
Internal Components, page 15
Diagnostics Button and LEDs, page 16
Installing a CMOS Battery, page 16
Installing the Storage Module, page 18
Removing a Heat Sink and CPU, page 19
Installing a New CPU and Heat Sink, page 20
Installing Memory, page 22
Installing an mLOM Adapter, page 27
Installing an Adapter Card, page 28
Installing the nVidia M6 GPU, page 31
Enabling the Trusted Platform Module, page 34
C H A P T E R
URL:http://www.cisco.com/c/en/us/
Cisco UCS B200 M4 Blade Server Installation and Service Note
3
11