Cisco UCS B200 M4 Installation And Service Note - Page 19

Browse online or download pdf Installation And Service Note for Server Cisco UCS B200 M4. Cisco UCS B200 M4 46 pages. For e5-2600 v4 series cpus
Also for Cisco UCS B200 M4: Installation And Service Note (30 pages), Upgrade Manual (9 pages), Servicing Manual (24 pages)

Print Page

Cisco UCS B200 M4 Installation And Service Note

Servicing a Blade Server

This chapter contains the following sections:

•

Drive Replacement

The modular storage system has two front-accessible drive bays that support hot-swappable, 2.5 inch drives.

If you purchased the UCS B200 M4 blade server without the modular storage system configured as a part of

the system, a pair of blanking panels may be in place. These panels should be removed before installing hard

drives, but should remain in place to ensure proper cooling and ventilation if the drive bays are unused.

You can remove and install hard drives without removing the blade server from the chassis.

The drives supported in this blade server come with the drive sled attached. Spare drive sleds are not available.

A list of currently supported drives is in the specification sheets at this

products/servers-unified-computing/ucs-b-series-blade-servers/datasheet-listing.html

Drive Replacement, page 11

Removing a Blade Server Cover, page 13

Air Baffles, page 14

Internal Components, page 15

Diagnostics Button and LEDs, page 16

Installing a CMOS Battery, page 16

Installing the Storage Module, page 18

Removing a Heat Sink and CPU, page 19

Installing a New CPU and Heat Sink, page 20

Installing Memory, page 22

Installing an mLOM Adapter, page 27

Installing an Adapter Card, page 28

Installing the nVidia M6 GPU, page 31

Enabling the Trusted Platform Module, page 34

C H A P T E R

URL:http://www.cisco.com/c/en/us/

Cisco UCS B200 M4 Blade Server Installation and Service Note