Cisco UCS B200 M4 설치 및 서비스 참고 사항 - 페이지 19

{카테고리_이름} Cisco UCS B200 M4에 대한 설치 및 서비스 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B200 M4 46 페이지. For e5-2600 v4 series cpus
Cisco UCS B200 M4에 대해서도 마찬가지입니다: 설치 및 서비스 참고 사항 (30 페이지), 업그레이드 매뉴얼 (9 페이지), 서비스 매뉴얼 (24 페이지)

페이지 인쇄

Servicing a Blade Server

This chapter contains the following sections:

•

Drive Replacement

The modular storage system has two front-accessible drive bays that support hot-swappable, 2.5 inch drives.

If you purchased the UCS B200 M4 blade server without the modular storage system configured as a part of

the system, a pair of blanking panels may be in place. These panels should be removed before installing hard

drives, but should remain in place to ensure proper cooling and ventilation if the drive bays are unused.

You can remove and install hard drives without removing the blade server from the chassis.

The drives supported in this blade server come with the drive sled attached. Spare drive sleds are not available.

A list of currently supported drives is in the specification sheets at this

products/servers-unified-computing/ucs-b-series-blade-servers/datasheet-listing.html

Drive Replacement, page 11

Removing a Blade Server Cover, page 13

Air Baffles, page 14

Internal Components, page 15

Diagnostics Button and LEDs, page 16

Installing a CMOS Battery, page 16

Installing the Storage Module, page 18

Removing a Heat Sink and CPU, page 19

Installing a New CPU and Heat Sink, page 20

Installing Memory, page 22

Installing an mLOM Adapter, page 27

Installing an Adapter Card, page 28

Installing the nVidia M6 GPU, page 31

Enabling the Trusted Platform Module, page 34

C H A P T E R

URL:http://www.cisco.com/c/en/us/

Cisco UCS B200 M4 Blade Server Installation and Service Note