Cisco UCS B200 M4 Manual de mantenimiento

Navegue en línea o descargue pdf Manual de mantenimiento para Servidor Cisco UCS B200 M4. Cisco UCS B200 M4 24 páginas. For e5-2600 v4 series cpus
También para Cisco UCS B200 M4: Nota de instalación y mantenimiento (30 páginas), Nota de instalación y mantenimiento (46 páginas), Manual de actualización (9 páginas)

Servicing a Blade Server

This chapter contains the following sections:

•

The Cisco UCS B200 M4 blade server uses an optional Cisco UCS FlexStorage modular storage subsystem

that can provide support for two drive bays and RAID controller, or NVMe-based PCIe SSD support

functionality. If you purchased the UCS B200 M4 blade server without the modular storage system configured

as a part of the system, a pair of blanking panels may be in place. These panels should be removed before

installing hard drives, but should remain in place to ensure proper cooling and ventilation if the drive bays

are unused.

You can remove and install hard drives without removing the blade server from the chassis.

The drives supported in this blade server come with the hot-plug drive sled attached. Empty hot-plug drive

sled carriers (containing no drives) are not sold separately from the drives. A list of currently supported drives

is in the

Before upgrading or adding a drive to a running blade server, check in the service profile and make sure the

new hardware configuration will be within the parameters allowed by the service profile.

Cisco UCS B200 M4 Blade Server Specification

Sheet.

Servicing a Blade Server