Cisco UCS B200 M4 Manual de mantenimiento - Página 2
Navegue en línea o descargue pdf Manual de mantenimiento para Servidor Cisco UCS B200 M4. Cisco UCS B200 M4 24 páginas. For e5-2600 v4 series cpus
También para Cisco UCS B200 M4: Nota de instalación y mantenimiento (30 páginas), Nota de instalación y mantenimiento (46 páginas), Manual de actualización (9 páginas)
Imprimir página
Removing a Blade Server Hard Drive
Note
See also
Removing a Blade Server Hard Drive
To remove a hard drive from a blade server, follow these steps:
Procedure
Step 1
Push the button to release the ejector, and then pull the hard drive from its slot.
Step 2
Place the hard drive on an antistatic mat or antistatic foam if you are not immediately reinstalling it in another
server.
Step 3
Install a hard disk drive blank faceplate to keep dust out of the blade server if the slot will remain empty.
Installing a Blade Server Drive
To install a drive in a blade server, follow these steps:
Procedure
Step 1
Place the drive ejector into the open position by pushing the release button.
Figure 1: Installing a Hard Drive in a Blade Server
Step 2
Gently slide the drive into the opening in the blade server until it seats into place.
Step 3
Push the drive ejector into the closed position.
You can use Cisco UCS Manager to format and configure RAID services. For details, see the Configuration
Guide for the version of Cisco UCS Manager that you are using. The configuration guides are available at
the following URL:
http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
Servicing a Blade Server
2
4K Sector Format SAS/SATA Drives Considerations, on page
Servicing a Blade Server
3.