Motorola CP 140 Manual del usuario - Página 24

Navegue en línea o descargue pdf Manual del usuario para Radio portátil Motorola CP 140. Motorola CP 140 26 páginas. Uhf2 (438-470mhz)
También para Motorola CP 140: Manual básico del usuario (16 páginas), Manual básico del usuario (16 páginas), Manual básico del usuario (18 páginas), Manual de servicio detallado (28 páginas), Manual de instalación del sintonizador Cps (6 páginas), Información de servicio (46 páginas), Información de servicio (46 páginas)

Imprimir página
Motorola CP 140 Manual del usuario

DELETE A NUISANCE CHANNEL

Note: Your dealer/programmer must preprogram a
button to access this feature.
If a channel continually generates unwanted calls or
noise (a "nuisance" channel), you can temporarily
remove it from the scan list:
1
While the radio is on the Nuisance Channel,
press the preprogrammed Nuisance
Channel Delete button until you hear a tone.
2
Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
Note: You cannot temporarily delete the
channel that has been pre-prgrammed
by your dealer/programmer as your
designated scan channel, a priority
channel, or the last remaining channel
in the scan list.
English
22

Restore Channels to the Scan List

1
Power off the radio. Once the radio is powered
on again, the deleted nuisance channels are
restored to the scan list.
or
–
–
1
Press the preprogrammed Scan button to stop
the scan.
2
Press the preprogrammed Scan button again
to start scanning again. The Deleted Nuisance
Channels are restored to the scan list.
or
–
–
1
Select a channel that has not been
preprogrammed for scan by your dealer /
programmer to stop Scan. Once you return to
the original channel, the deleted nuisance
channels are restored to the scan list.