Motorola CP 140 Manual do utilizador - Página 24

Procurar online ou descarregar pdf Manual do utilizador para Rádio portátil Motorola CP 140. Motorola CP 140 26 páginas. Uhf2 (438-470mhz)
Também para Motorola CP 140: Manual básico do utilizador (16 páginas), Manual básico do utilizador (16 páginas), Manual básico do utilizador (18 páginas), Manual de serviço detalhado (28 páginas), Manual de instalação do Cps/Tuner (6 páginas), Informações sobre o serviço (46 páginas), Informações sobre o serviço (46 páginas)

Imprimir página
Motorola CP 140 Manual do utilizador

DELETE A NUISANCE CHANNEL

Note: Your dealer/programmer must preprogram a
button to access this feature.
If a channel continually generates unwanted calls or
noise (a "nuisance" channel), you can temporarily
remove it from the scan list:
1
While the radio is on the Nuisance Channel,
press the preprogrammed Nuisance
Channel Delete button until you hear a tone.
2
Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
Note: You cannot temporarily delete the
channel that has been pre-prgrammed
by your dealer/programmer as your
designated scan channel, a priority
channel, or the last remaining channel
in the scan list.
English
22

Restore Channels to the Scan List

1
Power off the radio. Once the radio is powered
on again, the deleted nuisance channels are
restored to the scan list.
or
–
–
1
Press the preprogrammed Scan button to stop
the scan.
2
Press the preprogrammed Scan button again
to start scanning again. The Deleted Nuisance
Channels are restored to the scan list.
or
–
–
1
Select a channel that has not been
preprogrammed for scan by your dealer /
programmer to stop Scan. Once you return to
the original channel, the deleted nuisance
channels are restored to the scan list.