Motorola CP 140 Kullanıcı Kılavuzu - Sayfa 24

Taşınabilir Radyo Motorola CP 140 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola CP 140 26 sayfaları. Uhf2 (438-470mhz)
Ayrıca Motorola CP 140 için: Temel Kullanım Kılavuzu (16 sayfalar), Temel Kullanım Kılavuzu (16 sayfalar), Temel Kullanım Kılavuzu (18 sayfalar), Detaylı Servis Kılavuzu (28 sayfalar), Cps/Tuner Kurulum Kılavuzu (6 sayfalar), Hizmet Bilgileri (46 sayfalar), Hizmet Bilgileri (46 sayfalar)

DELETE A NUISANCE CHANNEL

Note: Your dealer/programmer must preprogram a

button to access this feature.

If a channel continually generates unwanted calls or

noise (a "nuisance" channel), you can temporarily

remove it from the scan list:

While the radio is on the Nuisance Channel,

press the preprogrammed Nuisance

Channel Delete button until you hear a tone.

Release the Nuisance Channel Delete

button. The nuisance channel is deleted.

Note: You cannot temporarily delete the

channel that has been pre-prgrammed

by your dealer/programmer as your

designated scan channel, a priority

channel, or the last remaining channel

in the scan list.

English

Power off the radio. Once the radio is powered

on again, the deleted nuisance channels are

restored to the scan list.

–

Press the preprogrammed Scan button to stop

the scan.

Press the preprogrammed Scan button again

to start scanning again. The Deleted Nuisance

Channels are restored to the scan list.

–

Select a channel that has not been

preprogrammed for scan by your dealer /

programmer to stop Scan. Once you return to

the original channel, the deleted nuisance

channels are restored to the scan list.