Epson Stylus Pro 4880 Portrait Edition Manual de instalación - Página 12

Navegue en línea o descargue pdf Manual de instalación para Software Epson Stylus Pro 4880 Portrait Edition. Epson Stylus Pro 4880 Portrait Edition 16 páginas. Warranty statement
También para Epson Stylus Pro 4880 Portrait Edition: Folleto (1 páginas), Hoja de especificaciones (6 páginas), Folleto y especificaciones (6 páginas), Manual de consulta rápida (12 páginas), Manual de la red (46 páginas), Manual de instalación (4 páginas), Manual de información del producto (16 páginas), Garantía limitada (12 páginas)

Epson Stylus Pro 4880 Portrait Edition Manual de instalación
8. Adjust the length of the paper guide and the
edge guide according to the paper size.
9. Put the paper guide roller down, and then
re-attach the paper tray cover.
Note:
Make sure the roll paper support is not raised.
10
Loading paper into the rear manual
feed slot
Note:
❏ You can load one sheet at a time into the rear feed
slot.
❏ Load paper with the printable surface up.
❏ Paper with a thickness between 0.08 and 1.6 mm
can be set in the landscape position. However,
always set recycled or plain paper and A4, Letter
size, or 8 × 10 in. paper in the portrait position,
regardless of the thickness.
1. Make sure the printer is on and in the READY
state.
2. Press the Paper Source
Sheet
on the LCD panel.
3. Hold the left and right edges of the paper.
Align the left edge of the paper with the target
paper size on the roll paper cover, and then
insert the paper until it meets resistance.
The printer automatically feeds the paper to
the printing position.
Note:
If you press the Pause button, the printer starts to
feed the paper to the printing position immediately.
button to select