Epson Stylus Pro 4880 Portrait Edition Kurulum Kılavuzu - Sayfa 12

Yazılım Epson Stylus Pro 4880 Portrait Edition için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Epson Stylus Pro 4880 Portrait Edition 16 sayfaları. Warranty statement
Ayrıca Epson Stylus Pro 4880 Portrait Edition için: Broşür (1 sayfalar), Şartname Sayfası (6 sayfalar), Broşür ve Teknik Özellikler (6 sayfalar), Hızlı Referans Kılavuzu (12 sayfalar), Ağ Kılavuzu (46 sayfalar), Kurulum Kılavuzu (4 sayfalar), Ürün Bilgi Kılavuzu (16 sayfalar), Sınırlı Garanti (12 sayfalar)

8. Adjust the length of the paper guide and the

edge guide according to the paper size.

9. Put the paper guide roller down, and then

re-attach the paper tray cover.

Note:

Make sure the roll paper support is not raised.

Loading paper into the rear manual

feed slot

Note:

❏ You can load one sheet at a time into the rear feed

slot.

❏ Load paper with the printable surface up.

❏ Paper with a thickness between 0.08 and 1.6 mm

can be set in the landscape position. However,

always set recycled or plain paper and A4, Letter

size, or 8 × 10 in. paper in the portrait position,

regardless of the thickness.

1. Make sure the printer is on and in the READY

state.

2. Press the Paper Source

Sheet

on the LCD panel.

3. Hold the left and right edges of the paper.

Align the left edge of the paper with the target

paper size on the roll paper cover, and then

insert the paper until it meets resistance.

The printer automatically feeds the paper to

the printing position.

Note:

If you press the Pause button, the printer starts to

feed the paper to the printing position immediately.

button to select