Philips AZ102S Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Sistema estéreo Philips AZ102S. Philips AZ102S 15 páginas. Cd soundmachine
También para Philips AZ102S: Especificaciones (2 páginas), Manual del usuario (14 páginas), Manual del usuario (2 páginas), Manual del usuario (2 páginas), Manual del usuario (15 páginas), Manual del usuario (2 páginas), Manual del usuario (18 páginas), Manual del usuario (13 páginas), Especificaciones (2 páginas), Manual del usuario (13 páginas), Manual del usuario (1 páginas), Manual de servicio (11 páginas)

Philips AZ102S Manual del usuario

Troubleshooting

If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING:
Problem
– Possible cause
• Remedy
No sound /power
– Volume not adjusted
• Adjust the VOLUME
– Power cord not securely connected
• Connect the AC power cord properly
– Batteries dead/ incorrectly inserted
• Insert (fresh) batteries correctly
– CD contains non-audio files
• Press ∞ , § once or more to skip to a CD audio
track, instead of the data file.
Display does not function properly / No
reaction to operation of any of the
controls
– Electrostatic discharge
• Switch off and unplug the set. Reconnect after a
few seconds
--, Er or 01 indication
– No CD inserted
• Insert a CD
– CD badly scratched or dirty
• Replace/ clean CD, see Maintenance
– Laser lens steamed up
• Wait until lens has cleared
– CD-R/CD-RW is blank or not finalized
• Use a finalized CD-R/CD-RW or suitable CD
Audio disc only
Do not open the set as there is a risk of electric shock. Under no
circumstances should you try to repair the set yourself, as this will
invalidate the guarantee.
Note:
Make sure the CD is not encoded with copy-
right protection technologies, as some do not
conform to the Compact Disc standard.
The CD skips tracks
– CD damaged or dirty
• Replace or clean CD
– Program/shuffle is active
• Quit program/shuffle mode
Note: A CD badly scratch or dirty may result in
improper operation.