Epson WorkForce 600 Series Manual Start Here - Página 3

Navegue en línea o descargue pdf Manual Start Here para Software Epson WorkForce 600 Series. Epson WorkForce 600 Series 9 páginas. Using the control panel for wireless network installation
También para Epson WorkForce 600 Series: Manual de instalación en red (41 páginas), Manual del usuario (34 páginas), Manual del usuario (38 páginas), Sustitución de cartuchos (2 páginas), Información importante sobre la instalación (2 páginas), Especificaciones (2 páginas), Boletín de asistencia sobre productos (5 páginas), Manual de funciones (28 páginas)

Install ink cartridges

Note:

Don't load paper before installing the ink cartridges.

Lift up the scanner.

Open the cartridge cover.

Shake the ink cartridges

gently 4 or 5 times, then

unpack them.

Remove only the yellow tape from each cartridge.

C aution:

Don't remove any other seals from the cartridges.

Insert the cartridges in the

holder for each color.

Press the cartridges down until they click.

Close the ink cartridge cover and press it

down until it clicks.

Close the scanner.

Press the OK button to charge ink. Charging takes about 2 minutes.

N ote:

Your WorkForce 600 Series ships with full cartridges and part of the

ink from the first cartridges is used for priming the WorkForce 600 Series.

Caution:

Don't turn off the WorkForce 600 Series while the ink system is

initializing or you'll waste ink.