Epson WorkForce 600 Series Start Here Manual - Page 3

Browse online or download pdf Start Here Manual for Software Epson WorkForce 600 Series. Epson WorkForce 600 Series 9 pages. Using the control panel for wireless network installation
Also for Epson WorkForce 600 Series: Network Installation Manual (41 pages), User Manual (34 pages), User Manual (38 pages), Cartridges Replacement (2 pages), Important Setup Information (2 pages), Specifications (2 pages), Product Support Bulletin (5 pages), Function Manual (28 pages)

Print Page
Epson WorkForce 600 Series Start Here Manual
4

Install ink cartridges

Note:
Don't load paper before installing the ink cartridges.
1
Lift up the scanner.
2
Open the cartridge cover.
3
Shake the ink cartridges
gently 4 or 5 times, then
unpack them.
4
Remove only the yellow tape from each cartridge.
C aution:
Don't remove any other seals from the cartridges.
5
Insert the cartridges in the
holder for each color.
6
Press the cartridges down until they click.
7
Close the ink cartridge cover and press it
down until it clicks.
8
Close the scanner.
9
Press the OK button to charge ink. Charging takes about 2 minutes.
N ote:
Your WorkForce 600 Series ships with full cartridges and part of the
ink from the first cartridges is used for priming the WorkForce 600 Series.
Caution:
Don't turn off the WorkForce 600 Series while the ink system is
initializing or you'll waste ink.