Epson WorkForce 600 Series Mulai dari Sini Manual - Halaman 3

Jelajahi secara online atau unduh pdf Mulai dari Sini Manual untuk Perangkat lunak Epson WorkForce 600 Series. Epson WorkForce 600 Series 9 halaman. Using the control panel for wireless network installation
Juga untuk Epson WorkForce 600 Series: Panduan Instalasi Jaringan (41 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (38 halaman), Penggantian Kartrid (2 halaman), Informasi Pengaturan Penting (2 halaman), Spesifikasi (2 halaman), Buletin Dukungan Produk (5 halaman), Manual Fungsi (28 halaman)

Install ink cartridges

Note:

Don't load paper before installing the ink cartridges.

Lift up the scanner.

Open the cartridge cover.

Shake the ink cartridges

gently 4 or 5 times, then

unpack them.

Remove only the yellow tape from each cartridge.

C aution:

Don't remove any other seals from the cartridges.

Insert the cartridges in the

holder for each color.

Press the cartridges down until they click.

Close the ink cartridge cover and press it

down until it clicks.

Close the scanner.

Press the OK button to charge ink. Charging takes about 2 minutes.

N ote:

Your WorkForce 600 Series ships with full cartridges and part of the

ink from the first cartridges is used for priming the WorkForce 600 Series.

Caution:

Don't turn off the WorkForce 600 Series while the ink system is

initializing or you'll waste ink.