Pioneer SPH-10BT Instrucciones de actualización del firmware - Página 5

Navegue en línea o descargue pdf Instrucciones de actualización del firmware para Receptor para automóvil Pioneer SPH-10BT. Pioneer SPH-10BT 6 páginas. Smartphone receiver
También para Pioneer SPH-10BT: Manual de instalación (33 páginas), Instrucciones de actualización del firmware (4 páginas), Manual de instrucciones (35 páginas), Instrucciones de actualización del firmware del sistema (7 páginas)

The receiver will reboot after the update is finished. Do not touch anything even when the screen is

12.

blacked out. After it has finished rebooting, the screen will return to Source OFF.

13.

The firmware update is now complete. Your Pioneer Smartphone Receiver is now ready for use.

Verify that the firmware has been updated

Perform the same procedure for "Displaying the firmware version" to check that the firmware has been

updated.

Procedure:

Start the vehicle engine (in an open, well-ventilated area).

If AV Source is on, press and hold SOURCE(MUSIC)/OFF to set the unit Source OFF

If Pioneer Smart Sync is connected, disconnect.

Press and hold Application Launch to display the "Initial" menu, then press to confirm.

Press> repeatedly to select "UPDATE, then press Application Launch to confirm.

Select the "S/W VER" to confirm the system info.