- ページ 5
カーレシーバー Pioneer SPH-10BTのPDF ファームウェア・アップデートの手順をオンラインで閲覧またはダウンロードできます。Pioneer SPH-10BT 6 ページ。 Smartphone receiver
Pioneer SPH-10BT にも： インストレーション・マニュアル (33 ページ), ファームウェア・アップデートの手順 (4 ページ), 操作マニュアル (35 ページ), システム・ファームウェアのアップデート手順 (7 ページ)
ページを印刷する
The receiver will reboot after the update is finished. Do not touch anything even when the screen is
12.
blacked out. After it has finished rebooting, the screen will return to Source OFF.
13.
The firmware update is now complete. Your Pioneer Smartphone Receiver is now ready for use.
Verify that the firmware has been updated
Perform the same procedure for "Displaying the firmware version" to check that the firmware has been
updated.
Procedure:
1.
Start the vehicle engine (in an open, well-ventilated area).
2.
If AV Source is on, press and hold SOURCE(MUSIC)/OFF to set the unit Source OFF
3.
If Pioneer Smart Sync is connected, disconnect.
4.
Press and hold Application Launch to display the "Initial" menu, then press to confirm.
5.
Press> repeatedly to select "UPDATE, then press Application Launch to confirm.
6.
Select the "S/W VER" to confirm the system info.