Pioneer SPH-10BT Инструкции по обновлению прошивки - Страница 5

Просмотреть онлайн или скачать pdf Инструкции по обновлению прошивки для Автомобильный приемник Pioneer SPH-10BT. Pioneer SPH-10BT 6 страниц. Smartphone receiver
Также для Pioneer SPH-10BT: Руководство по установке (33 страниц), Инструкции по обновлению прошивки (4 страниц), Руководство по эксплуатации (35 страниц), Инструкции по обновлению прошивки системы (7 страниц)

The receiver will reboot after the update is finished. Do not touch anything even when the screen is

12.

blacked out. After it has finished rebooting, the screen will return to Source OFF.

13.

The firmware update is now complete. Your Pioneer Smartphone Receiver is now ready for use.

Verify that the firmware has been updated

Perform the same procedure for "Displaying the firmware version" to check that the firmware has been

updated.

Procedure:

Start the vehicle engine (in an open, well-ventilated area).

If AV Source is on, press and hold SOURCE(MUSIC)/OFF to set the unit Source OFF

If Pioneer Smart Sync is connected, disconnect.

Press and hold Application Launch to display the "Initial" menu, then press to confirm.

Press> repeatedly to select "UPDATE, then press Application Launch to confirm.

Select the "S/W VER" to confirm the system info.