Dinel CLS-23 Manual - Página 10

Navegue en línea o descargue pdf Manual para Accesorios Dinel CLS-23. Dinel CLS-23 20 páginas. Capacitive level sesors
También para Dinel CLS-23: Manual de instrucciones (18 páginas)

Imprimir página

BN (1)

WH, BU (3)

BN (1)

Fig. 7: "S" type sensors connection

(2 - wire electronic switch)

WH, BU (3)

BN (1)

BK (4)

BU (3)

BN (1)

BK (4)

BU (3)

Fig. 8: "P" (PNP) type sensors connection

Fig. 9: "R" (NAMUR) type sensors connection

Output (BK)

+U (BN)

Fig. 10: Inside of the connector socket

Electrical connection must be done in de-energized state! For switching supply sources,

it is necessary to check that the input is galvanically separated from the network side

and that they are fitted with a filter suppressing the conforming interference (terminals

+ and – oscillate together towards the ground potential), or the interference is removed

in another manner.

0V (BU)

CLS–23_–_–_–S–_

Positive pole (+ U) of power supply

is connected through a load (relay) to

brown (blue) wire or pin connector No.

1, negative pole is connected to white

wire or pin connector No. 3.

Typ CLS–23_–_–_–P–_

Positive pole (+ U) of power supply is

connected to brown wire or pin connec-

tor No. 1, negative pole is connected to

blue wire or pin connector No. 3. Load

(relay) is connected to black wire or pin

connector No. 4.

Typ CLS–23_–_–_–R–_

Brown wire or pin connector No. 1 is

connected to positive pole (+U) of In-

trinsically safe supply unit. Blue wire or

pin.connector No. 3 is connected to

negative pole of Intrinsically safe sup-

ply unit.

Legend:

(1...3)

– Terminals number for variants with connector

– Brown

– White

– Black

– Blue

CLS–23