Whirlpool 8003437208836 Manual del usuario - Página 16
Navegue en línea o descargue pdf Manual del usuario para Lavadora Whirlpool 8003437208836. Whirlpool 8003437208836 20 páginas.
Imprimir página
TRANSPORT AND HANDLING
Never lift the washing machine by holding it at the worktop .
1 .
Pull out the mains plug, and close the water tap .
2 .
Make sure that door and detergent dispenser are properly
closed .
3 .
Disconnect the inlet hose from the water tap, and remove
the drain hose from your draining point . Remove all rest
water from the hoses, and fix them so that they cannot
get damaged during transport .
ELECTRICAL CONNECTION
FOR GREAT BRITAIN ONLY
Warning - this appliance must be earthed .
Fuse replacement
If the mains lead of this appliance is fitted with a BS 1363A
13amp fused plug, to change a fuse in this type of plug use an
A . S . T . A . approved fuse to BS 1362 type and proceed as follows:
1 . Remove the fuse cover (A) and fuse (B) .
2 . Fit replacement 13A fuse into fuse cover .
3 . Refit both into plug .
16
4 .
Refit the transport bolts . Follow the instructions for
removing the transport bolts in the "Installation Guide" in
reverse order .
Important: Do not transport the washing machine without
having fixed the transport bolts .
Important:
The fuse cover must be refitted when changing a fuse and if
the fuse cover is lost the plug must not be used until a correct
replacement is fitted . Correct replacement are identified by the
colour insert or the colour embossed in words on the base of
the plug . Replacement fuse covers are available from your local
electrical store .
For the Republic of Ireland only
The information given in respect of Great Britain will frequently
apply, but a third type of plug and socket is also used, the
2-pin, side earth type .
Socket outlet / plug (valid for both countries)
If the fitted plug is not suitable for your socket outlet,
Please contact After-Sales service for further instruction .
Please do not attempt to change plug yourself . This procedure
needs to be carried out by a qualified technician in compliance
with the manufactures instructions and current standard safety
regulations .
User manual