Whirlpool 8003437208836 User Manual - Page 16

Browse online or download pdf User Manual for Washer Whirlpool 8003437208836. Whirlpool 8003437208836 20 pages.

Print Page

TRANSPORT AND HANDLING

Never lift the washing machine by holding it at the worktop .

1 .

Pull out the mains plug, and close the water tap .

2 .

Make sure that door and detergent dispenser are properly

closed .

3 .

Disconnect the inlet hose from the water tap, and remove

the drain hose from your draining point . Remove all rest

water from the hoses, and fix them so that they cannot

get damaged during transport .

ELECTRICAL CONNECTION

FOR GREAT BRITAIN ONLY

Warning - this appliance must be earthed .

Fuse replacement

If the mains lead of this appliance is fitted with a BS 1363A

13amp fused plug, to change a fuse in this type of plug use an

A . S . T . A . approved fuse to BS 1362 type and proceed as follows:

1 . Remove the fuse cover (A) and fuse (B) .

2 . Fit replacement 13A fuse into fuse cover .

3 . Refit both into plug .

4 .

Refit the transport bolts . Follow the instructions for

removing the transport bolts in the "Installation Guide" in

reverse order .

Important: Do not transport the washing machine without

having fixed the transport bolts .

Important:

The fuse cover must be refitted when changing a fuse and if

the fuse cover is lost the plug must not be used until a correct

replacement is fitted . Correct replacement are identified by the

colour insert or the colour embossed in words on the base of

the plug . Replacement fuse covers are available from your local

electrical store .

For the Republic of Ireland only

The information given in respect of Great Britain will frequently

apply, but a third type of plug and socket is also used, the

2-pin, side earth type .

Socket outlet / plug (valid for both countries)

If the fitted plug is not suitable for your socket outlet,

Please contact After-Sales service for further instruction .

Please do not attempt to change plug yourself . This procedure

needs to be carried out by a qualified technician in compliance

with the manufactures instructions and current standard safety

regulations .

User manual