Whirlpool 8003437208836 Kullanıcı Kılavuzu - Sayfa 16
Yıkayıcı Whirlpool 8003437208836 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Whirlpool 8003437208836 20 sayfaları.
Sayfayı Yazdır
TRANSPORT AND HANDLING
Never lift the washing machine by holding it at the worktop .
1 .
Pull out the mains plug, and close the water tap .
2 .
Make sure that door and detergent dispenser are properly
closed .
3 .
Disconnect the inlet hose from the water tap, and remove
the drain hose from your draining point . Remove all rest
water from the hoses, and fix them so that they cannot
get damaged during transport .
ELECTRICAL CONNECTION
FOR GREAT BRITAIN ONLY
Warning - this appliance must be earthed .
Fuse replacement
If the mains lead of this appliance is fitted with a BS 1363A
13amp fused plug, to change a fuse in this type of plug use an
A . S . T . A . approved fuse to BS 1362 type and proceed as follows:
1 . Remove the fuse cover (A) and fuse (B) .
2 . Fit replacement 13A fuse into fuse cover .
3 . Refit both into plug .
16
4 .
Refit the transport bolts . Follow the instructions for
removing the transport bolts in the "Installation Guide" in
reverse order .
Important: Do not transport the washing machine without
having fixed the transport bolts .
Important:
The fuse cover must be refitted when changing a fuse and if
the fuse cover is lost the plug must not be used until a correct
replacement is fitted . Correct replacement are identified by the
colour insert or the colour embossed in words on the base of
the plug . Replacement fuse covers are available from your local
electrical store .
For the Republic of Ireland only
The information given in respect of Great Britain will frequently
apply, but a third type of plug and socket is also used, the
2-pin, side earth type .
Socket outlet / plug (valid for both countries)
If the fitted plug is not suitable for your socket outlet,
Please contact After-Sales service for further instruction .
Please do not attempt to change plug yourself . This procedure
needs to be carried out by a qualified technician in compliance
with the manufactures instructions and current standard safety
regulations .
User manual