Direct IP DC-E4213WRX Manual de instalación - Página 10
Navegue en línea o descargue pdf Manual de instalación para Cámara de seguridad Direct IP DC-E4213WRX. Direct IP DC-E4213WRX 18 páginas.
También para Direct IP DC-E4213WRX: Manual rápido (17 páginas)
Imprimir página
Part 1 – Introduction
Inserting a SD Memory Card
1
Loosen the screws counterclockwise and remove the
cover.
2
Insert a SD memory card into the SD memory card
slot with the 'micro SD' print facing upward.
Push the SD memory card until it disengages from the
slot, and then pull it out.
3
Cover the lens cover and tighten the screws
clockwise.
10
Make sure that the cover is joined properly when
screwing it; otherwise, the IP67 level is not guaranteed.
Waterproof Cable Installation
RJ45 waterproof rubber ring
RJ45 modular jack
RJ45 waterproof rubber ring
RJ45 modular jack
1
1
2
1
Insert a round rubber ring (silicone rubber) into the
RJ45 jack.
2
3
2
Insert the network cable into the waterproof cap,
rubber bushing, and waterproof cap body in order.
3
4
RJ45 connector protect cover
cable waterproof rubber ring
(The waterproof rubber ring is fastened to the connector protect cover.)
RJ45 connector back cover
RJ45 connector protect cover
cable waterproof rubber ring
(The waterproof rubber ring is fastened to the connector protect cover.)
RJ45 connector back cover