Xerox Synergix 8855 Manual complementario - Página 14
Navegue en línea o descargue pdf Manual complementario para Accesorios para impresoras Xerox Synergix 8855. Xerox Synergix 8855 28 páginas. Windows nt 4.0 postscript print driver user guide
También para Xerox Synergix 8855: Manual del usuario (44 páginas), Manual del usuario (11 páginas), Manual complementario (26 páginas), Manual de software (30 páginas)
Imprimir página
XES Synergix 8855 Controller Setup Manual for Firmware 7.0
Front Panel LEDs
The controller has four status LEDs in on the front panel. The functions of
these LED's are as follows:
•
LED1 – Color Green, labeled "Ready" –Indicates the controller is
powered-up and ready to process incoming jobs.
•
LED2 – Color Green, labeled "Busy" –Indicates the controller is busy
processing a job.
•
LED3 – Color Yellow, labeled "Mismatch" –Indicates either a media
mismatch has occurred and is blocking the job queue or a Job
Accounting error has occurred.
•
LED4 – Color Red, named "Attention" –Indicates an printer or finisher
fault occurred, or a paper jam, or out of toner or media, or a
communications problem with one of the devices.
During power-on self-test (POST), the AccXES software turns on LEDs 2,3,
and 4. After POST has successfully completed, LEDs 2,3, and 4 are
extinguished and LED 1 is turned on. If POST did not successfully complete
and the controller is not able to go into "Ready" state, all four LEDs are
extinguished.
LED1
LED2
Figure 4 - Location of LEDs
6
LED3
LED4