Directed Electronics Xpresskit DBALL Manual de instalación - Página 6
Navegue en línea o descargue pdf Manual de instalación para Accesorios para automóviles Directed Electronics Xpresskit DBALL. Directed Electronics Xpresskit DBALL 14 páginas. Databus all combo bypass module
También para Directed Electronics Xpresskit DBALL: Manual de instalación (14 páginas)
Imprimir página
Platform: DBALL
Firmware: GM5
Installation Type 3
(+) 12v
(-) Ground
Driver Door
Sense Trigger
Pin 37
31
40 49
21
11
1
10 41
If no wire is found in
pin 37, insert one to
enable connection.
Connector 1 at BCM
BCM is located at the left of steering column.
Exception: 2000-05 Pontiac Montana, 2000-05 Chevrolet Venture, and 2000-05 Oldsmobile Silhouette: located behind glove box.
* Rear Hatch or Trunk Release Input: With vehicle with motorized rear hatch, this input will release the hatch. See programming options to change its
operation.
Not required in D2D mode.
The Mobile Integration Systems
(+) Accessory Output
(+) Ignition 2 Output
(+) Brake Input
Parking Lights
1
8
9
16
Diagnostic connector
OBDII (connector side view)
2: Purple/Yellow: J1850
13: Red: (+) 12v
14: Black: (-) Ground
1: Black/White: RAP OFF
5: Violet/White: (AC) Tach Output
10: Yellow/Black: Keyless Data
52
RF Loop Connector
Programming button
44
LED
Vehicle CAN Bus Integration System
Ground
(-) Lock Output
(AC) Tach Input
(-) Unlock Output
(-) Rear Hatch or Trunk Release Output*
(-) AUX1 Right Sliding Door Output
(-) AUX2 Left Sliding Door Output
(+) Starter Output
(+) Ignition 1 Output
(-) GWR (Status)
DBALL
Hood Switch
(+) 12 V Input
(+) Starter
10: Blue/White: (-) GWR (Status) Input
9: Pink: (+) Ignition Input
8: Violet: (+) Starter Input
5: Violet/Black: (-) AUX2 Left Sliding Door Input
4: White/Violet: (-) AUX1 Right Sliding Door Input
3: Red/White: (-)
Rear Hatch or Trunk Release Input*
2: Blue: (-) Unlock Input
1: Green: (-) Lock Input
(+)12v
RX
(-) Ground
TX
P#: XKD2D65
© 2010 Directed Electronics. All rights reserved.
Rev.: 20101103
Page 6