Clarke IQ2000S Instrucciones de montaje y uso - Página 6

Navegue en línea o descargue pdf Instrucciones de montaje y uso para Calentador Clarke IQ2000S. Clarke IQ2000S 13 páginas. Infrared quartz heater

ASSEMBLY & OPERATION

Unpack the heater and check for any damage sustained in transit. Notify your

Clarke dealer immediately of any defects.

The heater is resistant to splashing but should be sheltered from direct rainfall,

as should the power cable, plug and supply outlet socket. A awning,

overhanging roof or other shelter should be used to protect from rain.

The heater should be positioned with at least 1 m clearance from any

combustible surfaces including furniture or other fabrics which could be

damaged by heat.

Ensure the heater faces the centre of

the space to be heated.

Never place any objects on, or

against the heater.

1. Set the lower tube (1) through the

hole in the base (2) with the

welded disc downwards & the

locating tongue in its seat in the

base. Secure with the washer (3)

and hand screw (4).

2. Connect tube (5) to the lower

tube (1) and secure with the two

screws.

3. Remove the screw (10) from the

end of the small tube (8) and

remove the locking ring (7) from

tube (6).

4. Slide the small tube (8) up through

the tube (6) (end with drilled hole

first), until it emerges from the

other end.

5. Screw the locking ring (7) back on

to tube 6.

6. Connect tube (6) to tube (5) and

secure with the two screws.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]