ABB REM 610 Manual de instalación - Página 9

Navegue en línea o descargue pdf Manual de instalación para Dispositivo de protección ABB REM 610. ABB REM 610 20 páginas. Motor protection relay
También para ABB REM 610: Manual del producto (16 páginas), Manual del producto (17 páginas)

Imprimir página
ABB REM 610 Manual de instalación
1MRS 752265-MUM
0RWRU 3URWHFWLRQ 5HOD\
Installation Manual
)OXVK PRXQWLQJ
You will not need a separate mounting kit when flush mounting the case. All
mounting accessories are included in the case.
To flush mount the case to the cut-out in the panel, first loosen the 4 M5 fixing
screws approximately 7 turns. Mount the case to the mounting cut-out and tighten
the screws; see
Fig. 4.3.-1
torque is 0.7...1Nm.
The enclosure class of the flush-mounted device is IP 54 on the front side, while the
rear side fulfils the IP 20 requirements (top of the relay: IP 40).
Caution!
!
A device equipped with optic connections requires a minimum
depth of 180 mm.
Panel
)LJ )OXVK PRXQWLQJ RI D FDVH
. The allowed value range for the fixing screws' tightening
Case
Fixing screws
M5 T25 Torx head
5(0
9