ABB REM 610 Manuel d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} ABB REM 610. ABB REM 610 20 pages. Motor protection relay
Également pour ABB REM 610 : Manuel du produit (16 pages), Manuel du produit (17 pages)

Imprimer la page
ABB REM 610 Manuel d'installation
1MRS 752265-MUM
0RWRU 3URWHFWLRQ 5HOD\
Installation Manual
)OXVK PRXQWLQJ
You will not need a separate mounting kit when flush mounting the case. All
mounting accessories are included in the case.
To flush mount the case to the cut-out in the panel, first loosen the 4 M5 fixing
screws approximately 7 turns. Mount the case to the mounting cut-out and tighten
the screws; see
Fig. 4.3.-1
torque is 0.7...1Nm.
The enclosure class of the flush-mounted device is IP 54 on the front side, while the
rear side fulfils the IP 20 requirements (top of the relay: IP 40).
Caution!
!
A device equipped with optic connections requires a minimum
depth of 180 mm.
Panel
)LJ )OXVK PRXQWLQJ RI D FDVH
. The allowed value range for the fixing screws' tightening
Case
Fixing screws
M5 T25 Torx head
5(0
9