3D Creations North American P 51 D Mustang Manual de instrucciones de montaje

Navegue en línea o descargue pdf Manual de instrucciones de montaje para Juguete 3D Creations North American P 51 D Mustang. 3D Creations North American P 51 D Mustang 15 páginas. Paper scale model kit

Imprimir página
3D Creations North American P 51 D Mustang Manual de instrucciones de montaje
North American P 51 D Mustang
Paper Scale Model Kit
The Items needed for assembly:
1. Glue stick
2. Liquid glue
3. Instant Bond type glue
4. Sharp Scissors
5. A ruler with a good straight edge
6. Round tooth picks
7. Cardboard from the back of a pad of paper or from a cereal box
8. Tweezers
9. An Exato knife or razor blade
Tips:
1. When cutting out the pieces to be assembled always cut slightly on the color side of
the line. Leaving a white edge will detract from the appearance of the model. Use
caution when cutting. Only remove enough color to eliminate the white edge. Cutting
the pieces undersize will alter the fit when gluing them together.
2. Any white area bordered by a black line is not to be cut off. This area is intended for
attachment beneath the adjoining piece.
3. Because of the need for rounded surfaces many of the pieces have to be assembled in
a cup like fashion. This is accomplished in the same manor you use to cup your
hands. By drawing together and overlapping the two pieces starting at their narrowest
overlap moving to the widest, the piece will take on a cup like appearance.
4. Use the solid glue stick unless otherwise specified. This helps eliminate applying too
much glue.
5. When applying glue, whenever possible, place it on the piece that will be on top of
the next. This also helps avoid applying too much glue.
6. Scoring creased folds using a straight edge helps make very straight creases. A letter
open is what I prefer.
By 3D Creations
1