3DUpFitters 3D Printer Carbon Air Filter Manual de instalación - Página 4
Navegue en línea o descargue pdf Manual de instalación para Impresoras 3D 3DUpFitters 3D Printer Carbon Air Filter. 3DUpFitters 3D Printer Carbon Air Filter 8 páginas. Carbon air filter/vent adapter
Imprimir páginaFind Air Flow Direction
The fan is powered by a 5V USB power supply (not included). Plug in the fan and notice in
which direction the air flows. You'll want to connect the fan to the filter so that the air is pulled
out of the enclosure and through the filter.
Attach the Fan/Filter to the Panel
There are two sizes of holes with 3DUPfitters enclosures for 60mm and 80mm fans.
With the larger 80mm-sized holes the screws are inserted from inside the enclosure
and through the nuts slotted into the filter itself as shown below. The filter and fan
combination are mounted on the outside of the enclosure.
Copyright 2019 3DUpfitters
4