3DUpFitters 3D Printer Carbon Air Filter 설치 매뉴얼 - 페이지 4

{카테고리_이름} 3DUpFitters 3D Printer Carbon Air Filter에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DUpFitters 3D Printer Carbon Air Filter 8 페이지. Carbon air filter/vent adapter

페이지 인쇄

Find Air Flow Direction

The fan is powered by a 5V USB power supply (not included). Plug in the fan and notice in

which direction the air ﬂows. You'll want to connect the fan to the ﬁlter so that the air is pulled

out of the enclosure and through the ﬁlter.

Attach the Fan/Filter to the Panel

There are two sizes of holes with 3DUPﬁtters enclosures for 60mm and 80mm fans.

With the larger 80mm-sized holes the screws are inserted from inside the enclosure

and through the nuts slotted into the ﬁlter itself as shown below. The ﬁlter and fan

combination are mounted on the outside of the enclosure.