3DUpFitters 3D Printer Carbon Air Filter Installationshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Installationshandbuch für 3D-Drucker 3DUpFitters 3D Printer Carbon Air Filter herunter. 3DUpFitters 3D Printer Carbon Air Filter 8 Seiten. Carbon air filter/vent adapter

Seite drucken

Find Air Flow Direction

The fan is powered by a 5V USB power supply (not included). Plug in the fan and notice in

which direction the air ﬂows. You'll want to connect the fan to the ﬁlter so that the air is pulled

out of the enclosure and through the ﬁlter.

Attach the Fan/Filter to the Panel

There are two sizes of holes with 3DUPﬁtters enclosures for 60mm and 80mm fans.

With the larger 80mm-sized holes the screws are inserted from inside the enclosure

and through the nuts slotted into the ﬁlter itself as shown below. The ﬁlter and fan

combination are mounted on the outside of the enclosure.