ClearWater Lights Darla Manual de instalación - Página 5
Navegue en línea o descargue pdf Manual de instalación para Accesorios para motocicletas ClearWater Lights Darla. ClearWater Lights Darla 12 páginas. Led light kit for bmw k1600gt
También para ClearWater Lights Darla: Manual de instalación (12 páginas), Manual de instalación (12 páginas), Manual de instalación (12 páginas), Manual de instalación (16 páginas)
Imprimir página
Wiring (Overview)
Wire Routing:
• Leave body panels off until the wiring is complete.
• Be sure to route wires so that they cannot become tangled or caught
in either a suspension part or steering part. Check movement of both
steering and suspension before riding the bike.
• It is sometimes helpful to follow existing wire routing.
Electrical Connections:
• Main power from our lights is provided by a CANbus safe harness
assembly. Use this to supply power to the lights. The relay is activated by
using a tap to an accessory power lead.
• Run the red and black power wires directly to the battery. The fuse will
protect the system in the event of a short.
• Use a Posi-twist to connect the green wire from the volume control
knob to the two green wires from the lights (3 wires).
• Use a Posi-twist to connect red from the CANbus to the red wires from
lights and volume control knob (4 wires)
• Use a Posi-twist to connect ground/black wire to black wires from
lights and volume control knob. (4 wires)
• If you are using the high beam feature (recommended), use a Posi-
tap to connect the white wire from the volume control knob to the high
beam headlight hot lead (+). This wire will be on only when the high
beam is illuminated.
Page 4
Page 5