ClearWater Lights Darla Руководство по установке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по установке для Аксессуары для мотоциклов ClearWater Lights Darla. ClearWater Lights Darla 12 страниц. Led light kit for bmw k1600gt
Также для ClearWater Lights Darla: Руководство по установке (12 страниц), Руководство по установке (12 страниц), Руководство по установке (12 страниц), Руководство по установке (16 страниц)

Wiring (Overview)

Wire Routing:

• Leave body panels off until the wiring is complete.

• Be sure to route wires so that they cannot become tangled or caught

in either a suspension part or steering part. Check movement of both

steering and suspension before riding the bike.

• It is sometimes helpful to follow existing wire routing.

• Main power from our lights is provided by a CANbus safe harness

assembly. Use this to supply power to the lights. The relay is activated by

using a tap to an accessory power lead.

• Run the red and black power wires directly to the battery. The fuse will

protect the system in the event of a short.

• Use a Posi-twist to connect the green wire from the volume control

knob to the two green wires from the lights (3 wires).

• Use a Posi-twist to connect red from the CANbus to the red wires from

lights and volume control knob (4 wires)

• Use a Posi-twist to connect ground/black wire to black wires from

lights and volume control knob. (4 wires)

• If you are using the high beam feature (recommended), use a Posi-

tap to connect the white wire from the volume control knob to the high

beam headlight hot lead (+). This wire will be on only when the high

beam is illuminated.

Page 4

Page 5