ClearWater Lights Darla Panduan Instalasi - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Aksesori Sepeda Motor ClearWater Lights Darla. ClearWater Lights Darla 12 halaman. Led light kit for bmw k1600gt
Juga untuk ClearWater Lights Darla: Panduan Instalasi (12 halaman), Panduan Instalasi (12 halaman), Panduan Instalasi (12 halaman), Panduan Instalasi (16 halaman)
Halaman Cetak
Wiring (Overview)
Wire Routing:
• Leave body panels off until the wiring is complete.
• Be sure to route wires so that they cannot become tangled or caught
in either a suspension part or steering part. Check movement of both
steering and suspension before riding the bike.
• It is sometimes helpful to follow existing wire routing.
Electrical Connections:
• Main power from our lights is provided by a CANbus safe harness
assembly. Use this to supply power to the lights. The relay is activated by
using a tap to an accessory power lead.
• Run the red and black power wires directly to the battery. The fuse will
protect the system in the event of a short.
• Use a Posi-twist to connect the green wire from the volume control
knob to the two green wires from the lights (3 wires).
• Use a Posi-twist to connect red from the CANbus to the red wires from
lights and volume control knob (4 wires)
• Use a Posi-twist to connect ground/black wire to black wires from
lights and volume control knob. (4 wires)
• If you are using the high beam feature (recommended), use a Posi-
tap to connect the white wire from the volume control knob to the high
beam headlight hot lead (+). This wire will be on only when the high
beam is illuminated.
Page 4
Page 5