ClearWater Lights Glenda Manual de instalación - Página 11
Navegue en línea o descargue pdf Manual de instalación para Accesorios para motocicletas ClearWater Lights Glenda. ClearWater Lights Glenda 12 páginas. Led light kit for bmw k1600gt
También para ClearWater Lights Glenda: Manual de instalación (12 páginas), Manual de instalación (12 páginas), Manual de instalación (12 páginas), Manual de instalación (16 páginas)
Imprimir páginaHelpful Hints:
Using a Drip Loop:
• Though our lights are sealed for ultimate all weather use, sometimes
water sneaks by. To make sure this doesn't happen, we highly suggest
using a drip loop. When installing the wiring to your lights, use a drip
loop as shown below. This will keep water from dripping directly into the
light and instead fall off before it can reach the back of the body.
• To do this just leave a bit of extra wiring and let it hang below the light.
You could make a complete loop if you like, but just make sure the wire
hangs below the light as shown below.
Posi-Products Installation Instructions:
Posi-Twist (A):
1. Strip all wires to be inserted 1/2" .
2. Twist all wires together before inserting into the Posi-twist.
3. Completely unscrew the top from the Posi-twist.
4. Feed the twisted wires through the bottom portion of the Posi-twist.
5. Attach the top and tighten, while ensuring the wires do not slip out of
the bottom of the Posi-twist.
Posi-Tap (B):
1. Unscrew the cap of the Posi-Tap (gray or large end).
2. Slide the wire you wish to tap into through the slot in the cap.
3. Re-attach the body of the Posi-Tap and tighten.
4. Attach the other wire to the bottom using the same method as a Posi-Twist.
No Drip Loop
A
With Drip Loop
B
Page 11