ClearWater Lights Glenda Manuale di installazione - Pagina 11
Sfoglia online o scarica il pdf Manuale di installazione per Accessori per moto ClearWater Lights Glenda. ClearWater Lights Glenda 12. Led light kit for bmw k1600gt
Anche per ClearWater Lights Glenda: Manuale di installazione (12 pagine), Manuale di installazione (12 pagine), Manuale di installazione (12 pagine), Manuale di installazione (16 pagine)
Stampa la paginaHelpful Hints:
Using a Drip Loop:
• Though our lights are sealed for ultimate all weather use, sometimes
water sneaks by. To make sure this doesn't happen, we highly suggest
using a drip loop. When installing the wiring to your lights, use a drip
loop as shown below. This will keep water from dripping directly into the
light and instead fall off before it can reach the back of the body.
• To do this just leave a bit of extra wiring and let it hang below the light.
You could make a complete loop if you like, but just make sure the wire
hangs below the light as shown below.
Posi-Products Installation Instructions:
Posi-Twist (A):
1. Strip all wires to be inserted 1/2" .
2. Twist all wires together before inserting into the Posi-twist.
3. Completely unscrew the top from the Posi-twist.
4. Feed the twisted wires through the bottom portion of the Posi-twist.
5. Attach the top and tighten, while ensuring the wires do not slip out of
the bottom of the Posi-twist.
Posi-Tap (B):
1. Unscrew the cap of the Posi-Tap (gray or large end).
2. Slide the wire you wish to tap into through the slot in the cap.
3. Re-attach the body of the Posi-Tap and tighten.
4. Attach the other wire to the bottom using the same method as a Posi-Twist.
No Drip Loop
A
With Drip Loop
B
Page 11