Ash OMNI 3 Manual de inicio rápido - Página 2
Navegue en línea o descargue pdf Manual de inicio rápido para Microscopio Ash OMNI 3. Ash OMNI 3 7 páginas.
Imprimir páginaOMNI
3
Quick Start User Guide Rev 3.1
STEP 3: Arm Attachment to Stand
1.
Attach Arm Receiver
the plated
Hook the Arm Bracket
2.
3.
Please ensure that the rear hooks are pointing downwards. Tighten the two Thumb
Screws
(3)
4.
Route all cables (except HDMI cable) through the hole on the underside of the Arm
Bracket.
2
1
3
STEP 4: Peripherals and head Attachment to Stand
Plug power cable into 24v DC power jack.
1.
2.
Plug External Keypad (if included; Preset optional accessory) into rear USB port.
3.
Plug HDMI Cable into HDMI Connector port at the rear of OMNI
4.
Insert dongle from mouse and keyboard into USB ports at side of OMNI
keyboard dongle can be inserted in a rear USB port to free up a side port).
5.
Now hook the OMNI
the unit.
Tighten the front 2 Thumb Screws on both sides to secure the OMNI 3.
6.
2
1
(1)
to the stand using the 4 screws provided. Please ensure to have
key*
towards the bottom.
onto the Arm Receiver
(2)
on both sides of the back of the arm bracket to secure.
3
on to the hooks of the Arm Receiver by slotting the 4 hooks into
3
using the 4 Hooks.
(1)
*Plated Key
3
4
5
4
and connect to monitor.
3
(optionally the
6
2 |
P a g e